油氣儲運網

 找回密碼
 立即注冊

QQ登錄

QQ快速登錄

一步迅速開始

pdms培訓&項目數字化360網
查看: 18215|回復: 10
打印 上一主題 下一主題

[軟件介紹] aspen EDR V8新功能介紹

[復制鏈接]
跳轉到指定樓層
樓主
發表于 2013-1-27 15:08:28 | 只看該作者 回帖獎勵 |倒序?yàn)g覽 |閱讀模式
aspen EDR: What's New in V8.0
Aspen EDR
The following new features and enhancements were added in release V8.0:
  • New EDR Start Page    全新的開始頁面
  • Direct Access to EDR Online Help 直接連接到EDR的在線幫助
  • Improved selection of printed reports from EDR  打印報告的選擇增強  
  • Improved report identification with the print header  改進的報表與打印頭的識別  
  • Improved ‘Import From Aspen Plus’ dialogues   改進從Aspen Plus導入功能
  • EDR “New” dialogue has been reorganized   重組EDR“新建”的對話已經進行

Aspen EDR Integration with Aspen Plus
  • The following new features and enhancements were added in release V8.0:
  • Improved dialogues for “Send to EDR” from Home Ribbon button
  • New “Rigorous Shell & Tube Sizing” work flow from HeatX setup form
  • New “Rigorous Air-cooled Exchanger Sizing” from HeatX setup form
  • Explicit support for EDR design template files from HeatX EDR Options form

Aspen EDR Integration with Aspen hysys
  • The following new features and enhancements were added in release V8.0:
  • Button on HYSYS Exchanger to switch streams between shell side and tube side
  • Improved HYSYS Exchanger forms – to clarify model selection
  • New “Rigorous Shell & Tube Auto-sizing” work flow
  • New “Rigorous Shell & Tube Interactive-sizing” work flow
  • New “Rigorous Air Cooler Auto-sizing” work flow
  • New “Rigorous Air Cooler Exchanger Interactive-sizing” work flow
  • Access to full Aspen Shell & Tube user Interface within HYSYS
  • Access to full Aspen Air Cooled user interface within HYSYS

Aspen Shell & Tube Exchanger
The following new features and enhancements were added in release V8.0:
  • Console, giving an immediate overview of key inputs and results, both tabulated and graphical.

    • New input to help prescribe certain parameters in Design mode.
    • New output of percent excess area, and ratio of actual to allowable pressure drop

  • Option of various types of finned tubes in X-shell Exchangers
  • Corrected maximum ρ v2 (rho-V-squared) limit used for sizing tube side nozzles
  • Options for handling accelerational pressure changes (particular relevance to low pressure exchanger modeling)
  • The handling multiple shells with U-bends has been improved to correctly calculate the shell-side coefficient in all shells
  • There is improved graphical output for X-shell exchangers in calculation details
  • Feedwater Heater Simulation and Rating: For all customers with an Aspen Shell & Tube Exchanger license, the full capability of the Aspen FRAN program is now available

Aspen Shell & Tube Mechanical
The following new features and enhancements were added in release V8.0:
  • ASME code update for calendar year 2012

    • Changes based on code cases as applicable
    • Includes BPVC VIII Div 1 and 2 (part 4) – 2011a (2012)
    • The main release will continue to be 2011a in calendar 2012
    • Material properties updates as applicable
    • Material prices were updated with a resulting average price increase of 2-1/2%

  • Added new tubesheet deflection calculation per mandatory requirement in UHX-13.4(d).  Used new derivations per UHX philosophy
  • Added additional flange types
  • Added additional tube-to-tubesheet joint
  • Added option to suppress nozzle reinforcement calculations when exempted by code rules.
  • Added minimum baffle thickness as a function of shell side corrosion allowance
  • Added type ‘g’ nozzles with self reinforcement in accordance to fig. UW-16.1 of ASME VIII Div 1
  • Added nozzle and reinforcing ring weld size information to the summary output.
  • Added logic to select a larger anchor bolt diameter when the uplift force due to wind and/or seismic loads exceeds the bolt allowable load.

Aspen Air Cooled Exchanger
The following new features and enhancements were added in release V8.0:
  • Console, giving an immediate overview of key inputs and results, both tabulated and graphical.

    • New input to help prescribe certain parameters in Design mode.
    • New output of percent excess area, and ratio of actual to allowable pressure drop

  • Option to specify the number of passes in design mode
  • New warning on fans with low coverage of the bundle
  • New warning for Designs using program default for allowable pressure drop.

Aspen Fired Heater
The following new features and enhancements were added in release V8.0:
  • Specification of main process stream duty as an alternative to specifying either inlet or outlet temperature.   
  • Specification of inlet enthalpy as an alternative to inlet temperature (for use when FiredHeater models are embedded in Aspen HYSYS or where process and property data are imported from Aspen HYSYS or Aspen Plus

Aspen Plate Exchanger
The following new features and enhancements were added in release V8.0:
  • Updated pressure drop correlations based on new Aspen HTFS research and modeling.  These correlations are described fully in Research Report RS 1227, which is available to the subscribers of Aspen HTFS Research Network.

Aspen Plate Fin Exchanger
The following new features and enhancements were added in release V8.0:
  • New stream details output for crossflow exchangers, showing how a range of parameters vary across the stream outlet.  Values are also shown across each pass outlet, for multi-pass crossflow streams. The parameters include stream pressure changes, and an estimated flow rate variation, based on these changes.
  • Fin databank file now recorded in program output
  • Option to perform flow –balance calculation for crossflow exchanges, to determine the flow variation across the outlet width.
  • Option to apply a multiplier to each process stream flowrate in a Simulation
  • New thermosiphon option, to find the pressure head needed to drive a flow, in addition to option to find the flow rate, or to find the inlet resistance to balance a specified flowrate.





油氣儲運網 - 論壇版權1、本主題所有言論和圖片純屬會員個人意見,與本論壇立場無關
2、本站所有主題由該帖子作者發表,該帖子作者與油氣儲運網享有帖子相關版權
3、其他單位或個人使用、轉載或引用本文時必須同時征得該帖子作者和油氣儲運網的同意
4、帖子作者須承擔一切因本文發表而直接或間接導致的民事或刑事法律責任
5、本帖部分內容轉載自其它媒體,但并不代表本站贊同其觀點和對其真實性負責
6、如本帖侵犯到任何版權問題,請立即告知本站,本站將及時予與刪除并致以最深的歉意
7、油氣儲運網管理員和版主有權不事先通知發貼者而刪除本文

沙發
發表于 2013-1-28 00:20:39 | 只看該作者
不知V8哪里可以下載!
板凳
發表于 2013-3-28 08:59:48 | 只看該作者
看見英語頭大。
地板
發表于 2013-4-30 12:00:12 | 只看該作者
有沒有單獨的aspen edr 的安裝包?
5#
發表于 2013-6-8 08:51:44 | 只看該作者
看來改進的內容還不少。
6#
發表于 2013-6-22 22:51:29 | 只看該作者
fired heater 有新內容?
7#
發表于 2014-3-5 21:55:45 | 只看該作者
謝謝分享!
8#
發表于 2014-3-5 21:58:47 | 只看該作者
沒用過!
9#
發表于 2015-7-3 09:45:53 | 只看該作者
很好很給哦里
10#
發表于 2016-7-25 21:02:22 | 只看該作者

很好很給哦里
您需要登錄后才可以回帖 登錄 | 立即注冊  

本版積分規則

掃碼訪問手機版

QQ|關于我們|網站地圖|油氣儲運網 ( 魯ICP備11007657號-3 )

GMT+8, 2024-12-23 18:07 , Processed in 0.028137 second(s), 13 queries , Gzip On, MemCached On.

Powered by Discuz! X3.5

Copyright © 2001-2023, Tencent Cloud.

快速回復 返回列表