aspen EDR V8新功能介紹

女女

aspen EDR: What's New in V8.0

Aspen EDR

The following new features and enhancements were added in release V8.0:

• New EDR Start Page    全新的開始頁面
• Direct Access to EDR Online Help 直接連接到EDR的在線幫助
• Improved selection of printed reports from EDR  打印報告的選擇增強  
• Improved report identification with the print header  改進的報表與打印頭的識別  
• Improved ‘Import From Aspen Plus’ dialogues   改進從Aspen Plus導入功能
• EDR “New” dialogue has been reorganized   重組EDR“新建”的對話已經進行
  
  

Aspen EDR Integration with Aspen Plus

• The following new features and enhancements were added in release V8.0:
• Improved dialogues for “Send to EDR” from Home Ribbon button
• New “Rigorous Shell & Tube Sizing” work flow from HeatX setup form
• New “Rigorous Air-cooled Exchanger Sizing” from HeatX setup form
• Explicit support for EDR design template files from HeatX EDR Options form
  
  

Aspen EDR Integration with Aspen hysys

• The following new features and enhancements were added in release V8.0:
• Button on HYSYS Exchanger to switch streams between shell side and tube side
• Improved HYSYS Exchanger forms – to clarify model selection
• New “Rigorous Shell & Tube Auto-sizing” work flow
• New “Rigorous Shell & Tube Interactive-sizing” work flow
• New “Rigorous Air Cooler Auto-sizing” work flow
• New “Rigorous Air Cooler Exchanger Interactive-sizing” work flow
• Access to full Aspen Shell & Tube user Interface within HYSYS
• Access to full Aspen Air Cooled user interface within HYSYS
  
  

Aspen Shell & Tube Exchanger

The following new features and enhancements were added in release V8.0:

• Console, giving an immediate overview of key inputs and results, both tabulated and graphical.
  
  
  • New input to help prescribe certain parameters in Design mode.
  • New output of percent excess area, and ratio of actual to allowable pressure drop
    
    
• Option of various types of finned tubes in X-shell Exchangers
• Corrected maximum ρ v2 (rho-V-squared) limit used for sizing tube side nozzles
• Options for handling accelerational pressure changes (particular relevance to low pressure exchanger modeling)
• The handling multiple shells with U-bends has been improved to correctly calculate the shell-side coefficient in all shells
• There is improved graphical output for X-shell exchangers in calculation details
• Feedwater Heater Simulation and Rating: For all customers with an Aspen Shell & Tube Exchanger license, the full capability of the Aspen FRAN program is now available
  
  

Aspen Shell & Tube Mechanical

The following new features and enhancements were added in release V8.0:

• ASME code update for calendar year 2012
  
  
  • Changes based on code cases as applicable
  • Includes BPVC VIII Div 1 and 2 (part 4) – 2011a (2012)
  • The main release will continue to be 2011a in calendar 2012
  • Material properties updates as applicable
  • Material prices were updated with a resulting average price increase of 2-1/2%
    
    
• Added new tubesheet deflection calculation per mandatory requirement in UHX-13.4(d).  Used new derivations per UHX philosophy
• Added additional flange types
• Added additional tube-to-tubesheet joint
• Added option to suppress nozzle reinforcement calculations when exempted by code rules.
• Added minimum baffle thickness as a function of shell side corrosion allowance
• Added type ‘g’ nozzles with self reinforcement in accordance to fig. UW-16.1 of ASME VIII Div 1
• Added nozzle and reinforcing ring weld size information to the summary output.
• Added logic to select a larger anchor bolt diameter when the uplift force due to wind and/or seismic loads exceeds the bolt allowable load.
  
  

Aspen Air Cooled Exchanger

The following new features and enhancements were added in release V8.0:

• Console, giving an immediate overview of key inputs and results, both tabulated and graphical.
  
  
  • New input to help prescribe certain parameters in Design mode.
  • New output of percent excess area, and ratio of actual to allowable pressure drop
    
    
• Option to specify the number of passes in design mode
• New warning on fans with low coverage of the bundle
• New warning for Designs using program default for allowable pressure drop.
  
  

Aspen Fired Heater

The following new features and enhancements were added in release V8.0:

• Specification of main process stream duty as an alternative to specifying either inlet or outlet temperature.   
• Specification of inlet enthalpy as an alternative to inlet temperature (for use when FiredHeater models are embedded in Aspen HYSYS or where process and property data are imported from Aspen HYSYS or Aspen Plus
  
  

Aspen Plate Exchanger

The following new features and enhancements were added in release V8.0:

• Updated pressure drop correlations based on new Aspen HTFS research and modeling.  These correlations are described fully in Research Report RS 1227, which is available to the subscribers of Aspen HTFS Research Network.
  
  

Aspen Plate Fin Exchanger

The following new features and enhancements were added in release V8.0:

• New stream details output for crossflow exchangers, showing how a range of parameters vary across the stream outlet.  Values are also shown across each pass outlet, for multi-pass crossflow streams. The parameters include stream pressure changes, and an estimated flow rate variation, based on these changes.
• Fin databank file now recorded in program output
• Option to perform flow –balance calculation for crossflow exchanges, to determine the flow variation across the outlet width.
• Option to apply a multiplier to each process stream flowrate in a Simulation
• New thermosiphon option, to find the pressure head needed to drive a flow, in addition to option to find the flow rate, or to find the inlet resistance to balance a specified flowrate.
  
  

辰逸。o_O

不知V8哪里可以下載！

0.002

看見英語頭大。

guduyou

有沒有單獨的aspen edr 的安裝包？

hnpy2007

看來改進的內容還不少。

fqin

fired heater 有新內容？

冬風

謝謝分享！

冬風

沒用過！！

23jieke

很好很給哦里

henidegushi

很好很給哦里