|
8#
樓主 |
發表于 2012-3-15 16:43:07
|
只看該作者
sps
SPS是一個功能強大的軟件,使用它可以對液體、氣體管道的水力和熱力特性進行精確的模擬分析和預測。它適用于單一流體、批次輸送流體以及單相混合流體,但不適用于多相流。按照SPS說明書的描述,它有以下功能:
•Analyzing startup and shutdown procedures
•啟停步驟分析
•Analyzing operational stability
•穩態分析
•Analyzing pump/compressor operating schedules
•泵/壓縮機操作過程分析
•Studying economics of various designs and operational strategies
•多方案設計經濟性研究
•Designing sequencing systems
•程序化系統設計
•Designing surge relief systems
•水擊泄放系統設計
•Designing cascade control systems
•連鎖控制系統設計
•Studying survival time for gas delivery systems
•氣體泄放系統的自救時間
•Analyzing system response to potential upset conditions and evaluating corrective strategies
•分析系統對潛在故障工況的響應并評估修正方案
• P redicting environmental impact of potential pipeline leakage
•預測管線泄漏對環境的影響
•Studying the effects of batching, side stream delivery or supply blending
•進行批次分析及分輸/輸入混油分析
•Studying temperature rise in re-circulation systems and cooling or heating of products due to a transient interchange of heat with the pipeline surroundings
•研究再循環系統溫升及管線與環境的瞬時熱交換而發生的制冷/制熱
•Studying thermal effects in gases, especially non ideal gases, such as Joule-Thompson cooling, decompression cooling, and inter-stage cooling required with polytropic compressors
•研究氣體,尤其是實際氣體的熱效應,例如焦耳-湯普生冷卻、壓冷卻、多元壓縮機的級間冷卻
•Designing minimum flow bypass controls to prevent surge conditions in polytropic compressors
•進行流量旁通設計,預防多元壓縮機的沖擊情況發生
•Studying the effects of pipe rupture, blow down cooling in gas pipelines to assess pipe steel brittleness, effect of pipe wrap and thermal environment in pipe burial on blow down rate
•研究管道抗裂程度,氣體管道冷泄放以評估管道韌性,管道包裹層及敷設處熱力環境對泄放速率的影響
|
|