| | |
SP-6-2007 | Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings | |
| Spot Facing for Bronze, Iron and Steel Flanges | |
| Standard Marking System for Valves, Fittings, Flanges and Unions | |
| Class 150 Corrosion Resistant Gate, Glove, Angle and Check Valves with Flanged and Butt Weld Ends | 150磅級,法蘭和對焊端耐腐蝕的閘閥、截止閥、角閥和止回閥 |
| Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | |
| | |
| (R 08)Bypass and Drain Connections | |
| Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings | |
| (R 07)Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components - Magnetic Particle Examination Method | 閥門、法蘭、管件和其他管道部件用鑄鋼件和鍛鋼件質量標準-磁粉檢驗方法 |
| (R 07)Quality Standard for Steel Castings for Valves, Flanges, and Fittings and Other Piping Components - Radiographic Examination Method | 閥門、法蘭、管件和其他管道附件用鋼鑄件質量標準射線照相檢驗方法 |
| Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components - Visual Method for Evaluation of Surface Irregularities | 閥門、法蘭、管件和其他管道部件用鑄鋼件質量標準—表面缺陷評定的目視檢驗方法 |
| Pipe Hangers and Supports - Materials, Design, Manufacture, Selection, Application, and Installation | |
| Connecting Flange Joint Between Tapping Sleeves and Tapping Valves | |
| Pressure Testing of Valves | |
| High Pressure Chemical Industry Flanges and Threaded Stubs for Use with Lens Gaskets | |
| | |
| (R 04)High Pressure Butterfly Valves with Offset Design | |
| Pipe Hangers and Supports - Selection and Application (ANSI/MSS Edition) | 管道支吊架-選型和應用(ANSI/MSS) |
| Gray Iron Gate Valves, Flanged and Threaded Ends | |
| Gray Iron Swing Check Valves, Flanged and Threaded Ends | |
| Ball Valves with Flanged or Butt-welding Ends for General Service | |
| Specification for High Test Wrought Butt Welding Fittings | |
| Gray Iron Plug Valves, Flanged and Threaded Ends | |
| Socket-Welding Reducer Inserts | |
| Bronze Gate, Globe, Angle and Check Valves | |
| Stainless Steel, Bonnetless, Flanged, Knife Gate Valves | |
|
| |
| Class 3000 Steel Pipe Unions, Socket-Welding and Threaded | |
| |
|
| Gray Iron Globe & Angle Valves, Flanged and Threaded Ends | |
| Guidelines for Metric Data in Standards for Valves, Flanges, Fittings and Actuators | |
| | |
| Guidelines for Manual Operation of Valves | |
| | |
| Quality Standard for Steel Castings and Forgings for Valves, Flanges, and Fittings and Other Piping Components - Liquid Penetrant Examination Method | 閥門、法蘭、管件及其他管道附件用鋼鑄件和鋼鍛件質量標準液體滲透檢驗方法 |
| Quality Std for Ferritic and Martensitic Steel Castings for Valves, Flanges, and Fittings and Other Piping Components – Ultrasonic Examination Method | 閥門、法蘭、管件及其他管路附件的鐵素件、馬氏體鑄鋼件質量標準超聲波檢驗方法 |
| Swage(d) Nipples and Bull Plugs | |
| (R 05)Guidelines on Terminology for Valves and Fittings | |
| Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends | 整體加強鍛制分支引出端管件-承插焊式、螺紋式與焊式端頭 |
| (R 05)Protective Coatings for the Interior of Valves, Hydrants, and Fittings | |
| |
|
| | |
| Qualification Requirements for Elastomer Diaphragms for Nuclear Service Diaphragm Valves | |
| (R 01)Part-Turn Valve Actuator Attachment - Flange and Driving Component Dimensions and Performance haracteristics | 部份回轉閥門驅動裝置的連接法蘭和驅動件的尺寸和工作特性 |
| (R 01)Multi-Turn Valve Actuator Attachment - Flange and Driving Component Dimensions and Performance haracteristics | 多回轉閥門驅動裝置的連接法蘭和驅動件的尺寸和工作特性 |
| Wrought Copper Solder Joint Pressure Fittings | |
| (R 05)Instrument Valves for Code Applications | |
| Cast Copper Alloy Flanges and Flanged Fittings, Class 125, 150 and 300 | 125,150和300磅的鑄造銅合金法蘭和法蘭管件 |
| Resilient-Seated Cast-Iron Eccentric Plug Valves | |
| (R 06)Welded Fabricated Copper Solder Joint Pressure Fittings | |
| Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends | |
| (R 05)Gray-Iron and Ductile-Iron Tapping Sleeves | |
| (R 04)Quality Standard for Evaluation of Cast Surface Finishes -Visual and Tactile Method. This SP must be sold with a 10-surface, three Dimensional Cast Surface Comparator, which is a necessary part of the Standard. Additional Comparators may be sold separately. | 評定鑄造表面粗糙度的質量標準目視和觸感方法 |
| (R 07) Connecting Joint between Tapping Machines and Tapping Valves | |
| Corrosion Resistant Pipe Fittings Threaded and Socket Welding, Class 150 and 1000 | |
| Excess Flow Valves, 1 1/4 NPS and Smaller, for Fuel Gas Service | 過剩的流動閥門, 1-1/4 NPS及更小的燃氣維修 |
| Service Line Valves and Fittings for Drinking Water Systems | |
| Bellows Seals for Globe and Gate Valves | |
| Compact Steel Globe & Check Valves - Flanged, Flangeless, Threaded & Welding Ends (Chemical & Petroleum Refinery Service) | 緊湊型法蘭、無法蘭、螺紋和焊接連接鋼制截止閥和止回閥(化工和石油精煉用) |
| Factory-Made Belled End Socket Welding Fittings | belled年底插座焊接設備,不銹鋼及銅鎳 |
| Flexible Graphite Packing System for Rising Stem Steel Valves (Design Requirements) | 升降式閥桿(明桿)鋼制閥門柔性石墨填料系統的設計要求 |
| Qualification Testing Methods for Stem Packing for Rising Stem Steel Valves | 升降式閥桿(明桿)鋼制閥門柔性石墨填料的鑒定試驗法 |
| Plastic Industrial Ball Valves | |
| (R 06) Non-Ferrous Threaded and Solder-Joint Unions for Use with Copper Water Tube | 非鐵線程和焊料-聯合工會的使用與銅水管 |
| Fabricated Tapping Sleeves | |
| Gray Iron and Ductile Iron In-Line, Spring-Loaded, Center-Guided Check Valves | |
| Steel In-Line Spring-Assisted Center Guided Check Valves | |
| Bracing for Piping Systems Seismic-Wind-Dynamic Design, Selection, Application | 管道系統支撐物的地震-風-動態設計,選型,應用 |
| | |
| (R 07) Copper-Nickel Socket-Welding Fittings and Unions | |
| Bellows Seals for Instrument Valves | |
| Metallic Manually Operated Gas Distribution Valves | |
| Compression Packing Systems for Instrument Valves | |
| Excess Flow Valves for Low Pressure Fuel Gas Appliances | |
| Valves for Cryogenic Service Including Requirements for Body/Bonnet Extensions | |
| High Pressure Steel Knife Gate Valves | |
| Ductile Iron Swing Check Valves | |
| Quality Standard for Positive Material Identification of Metal Valves, Flanges, Fittings, and Other Piping Components | 金屬閥、法蘭、管件和其它管道部件的肯定材料鑒定質量標準 |
| Quality Standard Practice for Oxygen Cleaning of Valves & Fittings | 閥門&管件氧清潔的質量標準規范 |
|
| |