油氣儲運網

 找回密碼
 立即注冊

QQ登錄

QQ快速登錄

一步迅速開始

pdms培訓&項目數字化360網
查看: 49824|回復: 62
打印 上一主題 下一主題

[學習教程] 小弟初來乍到,分享幾個TGNET教程!

[復制鏈接]
跳轉到指定樓層
樓主
發表于 2013-1-24 16:42:38 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式
本帖最后由 duchaoshandong 于 2018-3-15 14:24 編輯

        小弟正在學習TGNET,基本操作還可以,但是實際應用不理想,不知道各位師兄師姐有沒有具體的應用實例,跟小弟分享一下,不勝感激!
         

TGNET中文使用手冊.doc

1.51 MB, 下載次數: 417

售價: 3 金幣  [記錄]

advanced training manual for tgnet.rar

1.46 MB, 下載次數: 178

售價: 3 金幣  [記錄]

高級TGNET中文使用教材.pdf

1.29 MB, 下載次數: 404

售價: 3 金幣  [記錄]

TGNET中文使用手冊.doc

1.51 MB, 下載次數: 127

售價: 3 金幣  [記錄]


油氣儲運網 - 論壇版權1、本主題所有言論和圖片純屬會員個人意見,與本論壇立場無關
2、本站所有主題由該帖子作者發表,該帖子作者與油氣儲運網享有帖子相關版權
3、其他單位或個人使用、轉載或引用本文時必須同時征得該帖子作者和油氣儲運網的同意
4、帖子作者須承擔一切因本文發表而直接或間接導致的民事或刑事法律責任
5、本帖部分內容轉載自其它媒體,但并不代表本站贊同其觀點和對其真實性負責
6、如本帖侵犯到任何版權問題,請立即告知本站,本站將及時予與刪除并致以最深的歉意
7、油氣儲運網管理員和版主有權不事先通知發貼者而刪除本文

沙發
發表于 2013-1-24 19:06:36 | 只看該作者
多謝啊  這個是做什么的呢
板凳
發表于 2013-1-24 19:21:09 | 只看該作者
高級TGNET中文使用教材 目錄

第一章水力學基礎............................................................................................................................................. 4
一、輸氣管段流動過程的基本方程........................................................................................................4
二、 輸氣管段的基本流量公式..............................................................................................................5
三、流態的劃分與雷諾數........................................................................................................................5
四.TGNET 中使用的穩態基本流量公式.................................................................................................6
輸氣管段的水力摩阻系數................................................................................................................................. 6
一、光滑區...............................................................................................................................................6
二、混合摩擦區.......................................................................................................................................7
三、其他阻力系數公式(含阻力平方區)............................................................................................7
氣體狀態方程................................................................................................................................................... 10
一、氣體的狀態方程..............................................................................................................................10
二、真實氣體的狀態方程...................................................................................................................... 11
三、氣體狀態方程小結..........................................................................................................................13
溫度計算.................................................................................................................................................13
一、溫度計算選擇.................................................................................................................................13
二、總傳熱系數.....................................................................................................................................14
三、詳細傳熱計算.................................................................................................................................14
四、溫度計算比較.................................................................................................................................15
第二章 軟件概述............................................................................................................................................. 15
2.1 軟件的特點和主要用途...................................................................................................................15
2.2 軟件的人機界面...............................................................................................................................15
第三章使用軟件的準備工作............................................................................................................................ 19
3.1 建立管網模型文件...........................................................................................................................20
3.2 設置使用的單位制和單位...............................................................................................................24
3.3 設置模擬選項..................................................................................................................................25
3.4 合理選用摩阻公式和管道步長KNOT SPACE .....................................................................................27
3.5 合理選用狀態方程..........................................................................................................................28
3.6 打開溫度跟蹤和氣體屬性跟蹤......................................................................................................28
3.7 設定初始約束條件..........................................................................................................................29
3.8 保存管網模型文件...........................................................................................................................32
第四章穩態模擬的基本步驟............................................................................................................................ 33
4.1 輸入氣體參數..................................................................................................................................33
4.2 建立管網模型..................................................................................................................................35
4.3 管網模型的有效性檢查...................................................................................................................36
4.4 運行穩態模擬和查看計算結果.......................................................................................................37
第五章以批處理方式運行動態模擬的基本步驟............................................................................................ 41
5.1 建立動態腳本,添加必要的約束..................................................................................................... 41
5.2 指定需要的動態趨勢和報告的頻度................................................................................................. 45
5.3 運行動態模擬.................................................................................................................................... 46
5.4 查看動態模擬報告和趨勢報告......................................................................................................... 46
5.5 建立動態趨勢圖................................................................................................................................ 47
3
第六章交互(互動)式動態模擬.................................................................................................................... 48
6.1 啟動.................................................................................................................................................... 48
6.2 控制運行速度和數據刷新時間......................................................................................................... 48
6.3 選擇初始狀態.................................................................................................................................... 49
6.4 交互命令............................................................................................................................................ 49
6.5 退出命令............................................................................................................................................ 51
第七章 案例研究......................................................................................................................................... 53
1 不同參數如何影響計算流量..............................................................................................................53
2 已知數據DATA .....................................................................................................................................54
3、例題計算...........................................................................................................................................55
4、計算結果...........................................................................................................................................56
5、模擬結論SIMULATION CONCLUSION ........................................................................................................58
6 檢查錯誤.............................................................................................................................................59
7 簡單案例研究.....................................................................................................................................60
案例研究.......................................................................................................................................................... 61
一. 管道的儲氣能力案例研究..............................................................................................................61
二. 調峰分析案例研究。......................................................................................................................63
三. 氣源中斷、持續時間、及恢復過程案例分析..............................................................................68
四. 壓縮機停機及其后果分析案例研究..............................................................................................71
五. 縮機再啟動的時機和系統的恢復過程案例研究..........................................................................76
六. 泄漏分析案例研究..........................................................................................................................82
七. 儲氣、調峰和調壓時的溫度變化案例研究。..............................................................................87

地板
發表于 2013-1-24 19:22:26 | 只看該作者
TGNET中文使用手冊——氣體管線瞬態和穩態模擬計算軟件PIPELINE STUDIO FOR GAS  TGNET

目錄


PIPELINE STUDIO培訓························································································ 1
生產················································································································· 1
用戶················································································································· 1
培訓················································································································· 1
1    Lab 1  PIPELINE STUDIO介紹························································································ 3
1.1      起動PIPELINE STUDIO····································································································· 3
1.2      使用PIPELINE STUDIO····································································································· 3
1.3      打開和關閉組態文件·········································································································· 4
1.4      保存組態文件··················································································································· 5
1.5      輸入關鍵字文件················································································································ 6
1.6      輸入關鍵詞文件················································································································ 6
1.7      輸出組態文件作為關鍵詞文件······························································································ 7
1.8      退出PIPELINE STUDIO····································································································· 8
1.9      練習1A:·························································································································· 8
1.10    練習1B:·························································································································· 8
1.11    增加網絡元件或管線·········································································································· 8
1.12    建立管網······················································································································· 10
1.13    管網對象······················································································································· 11
1.14    使用GridSnap··········································································································· 12
1.15    縮放和平拉···················································································································· 12
1.16    對象尺寸······················································································································· 13
1.17    翻轉和旋轉對象·············································································································· 13
1.18    旋轉對象······················································································································· 13
1.19    移動對象······················································································································· 13
1.20    斷開節點······················································································································· 14
1.21    練習 1C:······················································································································· 14
1.22    有關圖象節點················································································································· 17
1.23    用圖象節點畫圖·············································································································· 17
1.24    運行靜態仿真················································································································· 18
1.25    運行瞬態仿真················································································································· 18
1.26    圖形輸出和書簽設定········································································································ 19
1.27    其它有關提示:·············································································································· 21
1.28    經常提到的問題·············································································································· 22
2    Lab 2  PIPELINE STUDIO輸入······················································································ 24
2.1      用網絡視圖進行工作········································································································ 24
2.2      用節點工作···················································································································· 24
2.3      設定節點粘接距離··········································································································· 25
2.4      編輯對象屬性················································································································· 25
2.5      練習 2A:······················································································································· 26
2.6      工作網絡評估················································································································· 26
2.7      練習 2B:······················································································································· 27
2.8      表格視圖······················································································································· 27
2.9      使用新表格向導·············································································································· 31
2.10    利用插入頁面向導··········································································································· 32
2.11    關于表格視圖使用Find Replace 以及 Set To Set To Initial··········································· 32
2.12    練習 2C:······················································································································· 34
2.13    用流體工作···················································································································· 34
2.14    以用戶屬性工作·············································································································· 35
2.15    用屬性視圖···················································································································· 37
2.16    練習2D:························································································································ 37
2.17    用單位工作···················································································································· 37
2.18    利用單位管理者·············································································································· 39
2.19    練習 2E:······················································································································· 39
2.20    有關屬性視圖················································································································· 40
2.21    用屬性視圖工作·············································································································· 40
2.22    有關提示:···················································································································· 42
2.23    經常提到的問題:··········································································································· 43
3     Lab 3  PIPELINE STUDIO的附加特點············································································ 45
3.1      使用PIPELINE STUDIO的幫助························································································· 45
3.2      鎖住幫助主題················································································································· 46
3.3      顯示幫助主題用作對話、窗口或視圖··················································································· 46
3.4      導航幫助系統················································································································· 46
3.5      打印幫助主題················································································································· 46
3.6      設定幫助選項················································································································· 47
3.7      用報表和輸出工作··········································································································· 47
3.8      發送 e-mail··················································································································· 48
3.9      技術支持······················································································································· 48
3.10    練習 3A:······················································································································· 49
3.11    插入對象······················································································································· 49
3.12    作為背景對象設定對象····································································································· 50
3.13    移動舊的輸出文件··········································································································· 51
3.14    利用 File Maintenance 公用程序······················································································· 51
3.15    工具欄·························································································································· 51
3.16    練習3B:························································································································ 54
3.17    用仿真工作···················································································································· 54
3.18    設定先進的仿真控制········································································································ 54
3.19    設定選項······················································································································· 55
3.20    使用舊的文件管理··········································································································· 55
3.21    練習 3C:······················································································································· 56
3.22    相關提示:···················································································································· 56
3.23    常見問答:···················································································································· 57
4    Lab4 PIPELINE STUDIO輸出························································································ 59
4.1      設定墻紙背景················································································································· 59
4.2      設定網絡視圖性質··········································································································· 59
4.3      用顏色工作···················································································································· 60
4.4      設定顏色圖案················································································································· 61
4.5      練習4A:························································································································ 61
4.6      設定視圖選項················································································································· 62
4.7      顯示/隱含狀態欄和工具欄·································································································· 62
4.8      使用Find用于網絡視圖···································································································· 63
4.9      用數據塊工作················································································································· 64
4.10    使用數據塊向導·············································································································· 65
4.11    編輯數據塊···················································································································· 65
4.12    移動數據塊···················································································································· 66
4.13    刪除數據塊···················································································································· 66
4.14    用格式化畫筆················································································································· 67
4.15    練習4B:························································································································ 68
4.16    瞬態考慮······················································································································· 68
4.17    建立瞬態方案················································································································· 69
4.18    用趨勢圖工作················································································································· 70
4.19    重新起動瞬態方案··········································································································· 70
4.20    運行仿真器里多個組態文件······························································································· 70
4.21    練習 4C:······················································································································· 71
4.22    用仿真工作···················································································································· 71
4.23    使用外形輪廓向導··········································································································· 73
4.24    利用外形輪廓················································································································· 75
4.25    練習4D:························································································································ 75
4.26    打印網絡視圖················································································································· 75
4.27    打印表格視圖················································································································· 76
4.28    工作報表······················································································································· 77
4.29    練習 4E:······················································································································· 78
4.30    有關提示:···················································································································· 80
5       Lab 5 PIPELINE STUDIO仿真原理··············································································· 81
5.1      流量方程······················································································································· 81
5.2      一般  方程:····················································································································· 81
5.3      AGA方程······················································································································ 81
5.4      Colebrook-White 方程····································································································· 82
5.5      Panhandle A:················································································································· 83
5.6      Panhandle B:················································································································· 83
5.7      Weymouth:···················································································································· 84
5.8      氣體流體······················································································································· 84
5.9      流體質量一般相關··········································································································· 85
5.10    氣體可壓縮性和密度一般相關··························································································· 85
5.11    BWRS 狀態方程用于可壓縮性氣體····················································································· 85
5.12    氣體的重度和熱值··········································································································· 86
5.13    氣體比重和熱值的BWRS 狀態方程···················································································· 86
5.14    氣體熱容(一般相關)····································································································· 86
5.15    流體質量BWRS 狀態方程································································································ 86
5.16    TGNET 里的溫度跟蹤和熱傳遞······················································································ 86
5.17    練習 5A:······················································································································· 98
5.18    仿真選項······················································································································· 98
5.19    練習 5B:······················································································································ 105
5.20    有關性質跟蹤················································································································ 105
5.21    文件命名貫例················································································································ 106
5.22    壓縮機、驅動器曲線······································································································· 106
5.23    壓縮機組和站················································································································ 107
5.24    有關驅動器··················································································································· 107
5.25    用驅動器工作················································································································ 107
5.26    用壓縮機組工作············································································································· 108
5.27    用站工作······················································································································ 109
5.28    用特性曲線工作············································································································· 110
5.29    用往復式特性曲線標識符(CPIDs)工作 (往復式 CPID’s················································ 111
5.30    氣缸工作······················································································································ 113
5.31    用驅動特性曲線標識符工作(DPIDs)工作········································································· 114
5.32    用透平特性曲線標識符(TPIDs)工作··············································································· 115
5.33    模型的一般提示和建立網絡······························································································ 116



PIPELINE STUDIO培訓
生產
歡迎來到PIPELINE STUDIO, ENERGYSOLUTIONS INTERNATIONAL 公司具有現代藝術圖形環境可為氣體和液體管網進行穩態和瞬態水力分析。
PIPELINE STUDIO內眾多的仿真工具集成在一個圖形環境下,所以可以利用穩態和瞬態模型,在Windows里進行組態,執行和分析氣體和液體管網環節。
PIPELINE STUDIO是我們工業上證實氣體和液體仿真的最新版本,它們分別是TGNET 7.1 TLNET 7.2
管網模型可以簡單也可以復雜。有各種標高外形和各種形式的設備。當大量數據進入程序的時候,可用代表管線和真實設備的符號,用熟悉的拖動和下拉技術建立網絡。且對有上下文相關的錯誤報告快速進入程序管網進行確認。
用戶
這個PIPELINE STUDIO培訓課程是個入門課程,給產品最初用戶或想通過PIPELINE STUDIO成為有生產能力的人而設置的。
PIPELINE STUDIO培訓課程的目的是給配管工程師、技術員或專業技術人員提供熟練技術,并熟悉產品。使得他們提高生產力和有效地使用產品。
培訓
PIPELINE STUDIO培訓提供實驗室型的環境,其意圖使培訓人員相互配合,高效率。目的保持學生的興趣和高度注意力。
你也許記得大學生或學院里化學課程是很凌亂的。在你不愉快時,經過學習有關的基礎概念理論以后,全景實驗或有時其他方式纏繞著你。PIPELINE STUDIO的培訓是有方法的有條有理的,使得用戶能夠從現有的實驗室和培訓有關的強有力的知識里獲得技能,講課、討論都與實驗相結合。

5#
發表于 2013-1-24 20:02:28 | 只看該作者
感謝分享~~樓主好人啊。
6#
發表于 2013-2-4 14:07:24 | 只看該作者
樓主發帖辛苦了。
7#
發表于 2013-2-17 13:45:32 | 只看該作者
好東西,頂頂頂
8#
發表于 2013-2-17 13:46:14 | 只看該作者
好東西,頂頂頂頂
9#
發表于 2013-2-17 17:30:24 | 只看該作者
很好的東東哦,謝謝樓主
10#
發表于 2013-2-19 09:23:36 | 只看該作者
好東西 頂下你
您需要登錄后才可以回帖 登錄 | 立即注冊  

本版積分規則

掃碼訪問手機版

QQ|關于我們|網站地圖|油氣儲運網 ( 魯ICP備11007657號-3 )

GMT+8, 2024-12-23 21:44 , Processed in 0.037070 second(s), 13 queries , Gzip On, MemCached On.

Powered by Discuz! X3.5

Copyright © 2001-2023, Tencent Cloud.

快速回復 返回列表