謝謝 樓主的好資料

收藏！非常不錯的資料！

學習了，謝謝樓主分享

非常不錯的分享

竟然如此詳細、{:4_88:}

竟然如此詳細、

恩，很有知識

樓主6666666666666666

There are a few types of ball valves related to the attachment and lateral movement of the ball:

A trunnion ball valve has additional mechanical anchoring of the ball at the top and the bottom, suitable for larger and higher pressure valves (say, above 10 cm and 40 bars).
A floating ball valve is one where the ball is not held in place by a trunnion. In normal operation, this will cause the ball to float downstream slightly. This causes the seating mechanism to compress under the ball pressing against it. Furthermore, in some types, in the event of some force causing the seat mechanism to dissipate (such as extreme heat from fire outside the valve), the ball will float all the way to metal body which is designed to seal against the ball providing a somewhat failsafe design.