標題: 初學者——弱弱的問個pipesim 結果輸出的問題 [打印本頁] 作者: VeraZhang 時間: 2014-7-23 21:44 標題: 初學者——弱弱的問個pipesim 結果輸出的問題 用pipesim建了個模型,用的是paper上的實驗數(shù)據(jù)模擬段塞流,實驗大致如下
The working media of experiment is water and air. Dry air (6 barg) and water are mixed and pump to a 65m long, 50.8mm diameter horizontal steel pipeline connected to a 35 m long ,50.8mm diameter Perspex pipeline which is inclined to -2.54 degree from horizontal , followed by a 15.5 m high ,45mm vertical PVC riser operating at atmospheric end pressure
D:\630data
network simulation能run
怎么輸出riser的 壓降和top riser 的液體出口流量?用nodal analysis嗎?nodal point 只能建在well 和設備上嗎 ?
哪位大師能幫幫忙,不勝感激!